Pali componibili CampionLight - Composable decorative columns

Lighting and decorative composable system made by a company ISO9001 certified and having authorisation as processing centre according to DM 14/01/08, brand palicampion, type “CAMPIONLIGHT”, in the configuration column with 1/2/3/4 brackets namely composed of:

➔ Cylindrical steel column Ø 102 type TCA......., prepared to be fixed to the basement by direct planting into the foundation block, manufactured using induction longitudinally welded tubes UNI EN 10219/2, steel grade S235JR UNI EN10219/. The columns provided for the anchorage to the basement by direct planting into the foundation block, are completed with 3 standard works at the base for the electric wiring according to the standard: cable entry slot, earthing connection, slot for junction box housing. Arrangement for coupling the foreseen brackets and aluminium cover on top.

➔ Brackets Ø 60, type CARB......., manufactured employing induction longitudinally welded tubes UNI EN 10219/2, steel grade S235JR UNI EN10219/1, bent on purpose made mould according to the shape to be obtained, prepared with connection suitable to the foreseen lighting fixture and closed with plastic caps on the open ends.

➔ Colums-brackets coupling device, type CARA.........., in die cast aluminium, composed of a ring Ø 180 th.30 for column Ø 102, double shelf 140x100 th.18 for each bracket Ø 60 fixing bolts and nuts inox not visiblecomposed of allen screws an swaged hexagonal head screws .

Tolérances on dimensions UNI EN 40/2 - UNI EN 10051.

Protection against corrosion by means of hot dip galvanization obtained with the following cycle: degreasing; pickling, washing, fluxing, pre heating; hot dip galvanization in melted zinc bath at 440÷450°, with minimum percentage of zinc into the bath ≥ 98.5%.

Coating obtained according to UNI EN ISO 1461 with minimum thickness 55 microns et average 70 microns.

External painting, if any, with colour from our colour card, rough effect, obtained with thermosetting powders cycle including: cleaning from zinc coating burs; smoothing of the surfaces by means of a light mechanic device; cleaning of the surfaces in order to eliminate grease or dirty and create a good adherence base; application by means of electrostatic spray of polyester powder suitable for galvanized surfaces for outside installation, in order to reach 60/80 micron thickness; polymerization into oven at constant temperature of approx. 200° for 40-50 minutes, package for each column, by banding with tissue 100% polyester, (no pluriball), in order to avoid damages during the handling phase. The characteristics of the obtained coat will be: average thickness 60 micron, resistance to checkering test ISO2409, resistance to crash test to UNI8901 The columns will be CE marked according to the standard in force (DPR246/93, 89/106/CEE; 93/68/CEE). The label on each column must quote: standard reference EN40-5, manufacturer’s identification, certificate number of the authorization to the mark CE CPD P029, year of marking, product code, and order number reference

.

Columns

Column / bracket coupling devices

Brackets

Document owned by Pali Campion srl. Reproduction is permitted only if the source is cited. Technical data are indicative; final specifications will be stated when ordering.