Lighting and decorative columns model “heliopolis”

Tender specification

Special lighting and decorative column brand “iPaliarredo” collection, series “Old” modell “HELIOPOLIS”, height up to the lighting source ~ 4 meters above ground, composed of:

➔ Base element completely made of die cast iron big thickness, 800 high, conical shaped, with grooves and relief, d.base 230, bearing plate 280x280 to be fixed with 4 anchor bolts fixed to the foundation block, access door to the inside junction box

➔ Upper element made of steel cylindrical shaped d.89, upper capital, end prepared for lighting fitting connection

➔ Junction box 235x70x45, class II double insulated, CEI EN 60668-1, CEI EN 60998-2-1, box IP54, 4 poles 3 ways, rear in/out 4x1.5-16 sqmm, looping 4x1,5-4 sqmm, 1 sectionable fuse holder 8,5x31,5 max 10A on a DIN rail

Protection against corrosion of the cast iron elements by means of metallization.

External painting, if any, with colour from our colour card, rough effect, obtained with thermosetting powders cycle including: cleaning from zinc coating burs; smoothing of the surfaces by means of a light mechanic device; cleaning of the surfaces in order to eliminate grease or dirty and create a good adherence base; application by means of electrostatic spray of polyester powder suitable for galvanized surfaces for outside installation, in order to reach 60/80 micron thickness; polymerization into oven at constant temperature of approx. 200° for 40-50 minutes, package for each column, by banding with tissue 100% polyester, (no pluriball), in order to avoid damages during the handling phase. The characteristics of the obtained coat will be: average thickness 60 micron, resistance to checkering test ISO2409, resistance to crash test to UNI8901

Document owned by Pali Campion srl. Reproduction is permitted only if the source is cited. Technical data are indicative; final specifications will be stated when ordering.