Small bracket connections (straight small brackets) made by a company ISO9001 certified and having authorisation as processing centre according to DM 14/01/08, brand Palicampion, manufactured employing stucturla steel tubes UNI EN 10219. Arranged with socket for insertion on column with top 60. Welding done by welders qualified by the I.I.S. (Italian Institute of Welding) and with welding quality check according to EN ISO 3834.
Tolerances on dimensions UNI EN 40/2 - UNI EN 10219/2.
Protection against corrosion by means of hot dip galvanization obtained with the following cycle: degreasing; pickling, washing, fluxing, pre heating; hot dip galvanization in melted zinc bath at 440÷450°, with minimum percentage of zinc into the bath ≥ 98.5%. Coating obtained according to UNI EN ISO 1461 with minimum thickness 55 microns et average 70 microns.
External painting, if any, with colour (choosing from our colour chart: black, anthracite, brown, umbra, granite, graphite, green, reseda, steel, ultramarine, dusty, aluminum, ruby, chestnut, ivory, white) rough effect, obtained with thermosetting powders cycle including: cleaning from zinc coating burs; smoothing of the surfaces by means of a light mechanic device; cleaning of the surfaces in order to eliminate grease or dirty and create a good adherence base; application by means of electrostatic spray of polyester powder suitable for galvanized surfaces for outside installation, in order to reach 60/80 micron thickness; polymerization into oven at constant temperature of approx. 200° for 40-50 minutes, package for each piece, by banding with tissue 100% polyester, (no pluriball), in order to avoid damages during the handling phase. The characteristics of the obtained coat will be: average thickness 60-micron, resistance to checkering test ISO2409, resistance to crash test to UNI8901
| Product Code | Decription |
|---|---|
| C84M | Single bracket made of structural steel tube d60x200 EN10219, tilting 15°, with socket for top column d60, galvanised ISO1461. Marking CE-EN1090 |
| C84BM | Double bracket made of structural steel tube d60x200 EN10219, tilting 15°, with socket for top column d60, galvanised ISO1461. Marking CE-EN1090 |
| C84TM | Triple bracket made of structural steel tube d60x200 EN10219, tilting 15°, with socket for top column d60, galvanised ISO1461. Marking CE-EN1090 |
| C84QM | Quadruple bracket made of structural steel tube d60x200 EN10219, tilting 15°, with socket for top column d60, galvanised ISO1461. Marking CE-EN1090 |
Document owned by Pali Campion srl. Reproduction is permitted only if the source is cited. Technical data are indicative; final specifications will be stated when ordering.
File details
- File name
- 01 Pipette C84 -small bracket_rev20260219.doc
- Created on
- Last modified
- SHA-256
0985ff68ced797ca6c24a4da274026469c52b3801898a7e17cfe276429a094d4